Tycon Systems TP-SW4GBT-2SFP network switch L2+ Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black

SKU
TP-SW4GBT-2SFP
$373.96
In stock
PoE Sw, GigE 4x 802.3bt, 2xSFP, Mgmt,DIN
The TP-SW4GBT-2SFP Power over Ethernet (PoE) 6 port Gigabit switch offered by Tycon is fully automatic high speed Layer 2+ Ethernet manageable switches. The 6 port model has 4 GigE PoE++(90W) and 2 SFP 2.5G ports. The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 360W. They utilize industry standard 802.3at/bt detection for fully automatic operation. The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP. With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch. Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported. The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power. The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire. The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
SKU TP-SW4GBT-2SFP
EAN 00810017123377
Specification
Power
Power connectorDC-in jack
DC input voltage47 - 57 V
Power sourceDC
Technical details
Product colourBlack
Mean time between failures (MTBF)100000 h
Management features
Switch layerL2+
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Installed SFP modules quantity2
Gigabit Ethernet (copper) ports quantity4
Power connectorDC-in jack
Network
Networking standardsIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
Data transmission
MAC address table8000 entries
Protocols
Management protocolsWEB, CLI, TELNET, SSH, SNMP
Certificates
CertificationCE, FCC, RoHS
Design
Product colourBlack
LED indicatorsYes
CertificationCE, FCC, RoHS
Performance
Mean time between failures (MTBF)100000 h
Indication
LED indicatorsYes
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity4
Power over Ethernet (PoE)Yes
Operational conditions
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Weight & dimensions
Width6.1" (155 mm)
Depth4.61" (117 mm)
Height1.5" (38 mm)
Weight21.2 oz (600 g)
Manufacturer Tycon Systems
In Stock Y