Tripp Lite B127A-110-BH AV extender AV repeater

SKU
B127A-110-BH
$80.25
In stock
HDMI over Cat6 Receiver with Repeater, 4K 60Hz, HDR, 4:4:4, IR Transceiver, PoC, HDCP 2.2, 230 ft., TAA
HDMI Extender Transceiver Unit Ideal for Digital Signage in Schools and Restaurants
This 4K IR transceiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Combines with HDMI Extender Kit to Add More Distance
The B127A-110-BH works with B127A-111-BHTH extender kit (sold separately) to further extend a 4K audio/video signal up to 230 feet. It connects between the transmitter and transceiver from the extender kit with user-supplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-110-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This transceiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Create a Daisy Chain to Achieve More Distance
This transceiver combines with the B127A-111-BHTH extender kit (sold separately) and additional B127A-110-BH transceivers to form daisy-chain installations up to 920 feet from the transmitter. Up to four total transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. In addition to the extender kit, this transceiver is also compatible with B127A-1A1-BCBH, B127A-1A1-BDBH and B127A-1A1-BHBH and can be used to replace any receivers in the installation as well.

Add a Signal Booster to Achieve, Yes, Even More Distance
The transceiver is also compatible with B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. Note
: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Built-In PoC Technology Lets You Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver at the end of the chain over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet. Power is also equally distributed to any additional transceivers within a daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The transceiver works right out of the box with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the transceiver to a transmitter and any additional transceiver with user-supplied Cat6 patch cable (such as N202-Series). Connect to a 4K display with a user-supplied HDMI cable (such as P568- or P569-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-110-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
SKU B127A-110-BH
EAN 0037332258601
Specification
Features
MaterialMetal
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
TypeAV repeater
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance2759.8" (70.1 m)
Audio systemMultichannel
LED indicatorsYes
Cable length54.3" (1.38 m)
Extended display identification data (EDID)Yes
Ports & interfaces
Remote (IR) output1
Remote (IR) input1
RJ-45 input ports1
RJ-45 output ports1
Number of HDMI outputs1
DC-in jackYes
Connectivity technologyWired
Digital audio optical out1
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Operating voltage24 V
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Width4.53" (115 mm)
Height1.06" (27 mm)
Depth2.46" (62.4 mm)
Packaging data
Package depth6.46" (164.1 mm)
Package width10.2" (260.1 mm)
Package height2.17" (55.1 mm)
Package weight23.3 oz (660 g)
Packaging content
Mounting kitYes
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Technical details
Country of originTaiwan
Sustainability complianceYes
Compliance certificatesCE, REACH, RoHS
Logistics data
Master (outer) case width22.6" (573 mm)
Master (outer) case length10.7" (273 mm)
Master (outer) case height6.89" (175 mm)
Master (outer) case gross weight15.2 lbs (6.9 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332258608
Manufacturer Tripp Lite
PDF Url https://objects.icecat.biz/object
In Stock Y