Monoprice 2405 video cable adapter 120" (3.05 m) HDMI Type A (Standard) DVI-D Black

SKU
2405
$9.27
In stock
10ft 28AWG High Speed HDMI to DVI Adapter Cable with Ferrite Cores, Black
Note that this cable is NOT an ordinary HDMI® cable. This is specifically for connecting a device with an HDMI connector to another device equipped with a Single Link DVI-D connector, typically found on PCs, projectors, and older video equipment before the HDMI standard became widespread. These cables can NOT carry audio. They carry video signals only!

This HDMI to DVI Adapter Cable is capable of video performance equivalent to a High Speed HDMI Cable.

Ferrite Cores are small magnetic blocks wrapped around the end of a cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat. This is the simplest and cheapest form of electronic noise reduction and is most effective on small gauge cabling, which is inherently more susceptible to electronic noise interference than thicker cables.
SKU 2405
EAN 0844660024057
Specification
Features
Colour depth48 bit
Product colourBlack
Number of shielding layers3
Bandwidth340 MHz
Cable length120" (3.05 m)
Connector 1HDMI Type A (Standard)
Connector 2DVI-D
Connector 1 genderMale
Connector 2 genderMale
Connector contacts platingGold
AWG wire size28
Data transfer rate10.2 Gbit/s
3DYes
Maximum resolution3840 x 2160 pixels
Supported video modes480i, 480p, 1080p, 2160i, 2160p
HDCPYes
Connector 1 form factorStraight
Connector 2 form factorStraight
Ferrite beadYes
Technical details
Compliance certificatesRoHS
Manufacturer Monoprice
In Stock Y