Tripp Lite B156-003-HD-V2 video splitter DisplayPort 3x HDMI

SKU
B156-003-HD-V2
$82.64
In stock
3-Port DisplayPort 1.2 to HDMI Multi-Stream Transport (MST) Hub, 3840 x 2160 (4K x 2K) UHD
Displays the same image on 3 HDMI monitors, extends the desktop across all three, or combines all into one large monitor. Ideal for digital signage in schools, churches, conference rooms, trade shows and retail outlets.

- Supports UHD video resolutions up to 3840 x 2160 (4K x 2K)
- Built-in 6 in. cable connects directly to DisplayPort source
- Supports up to 48-bit Deep Color (16 bits per channel)
- Works with all operating systems
- Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound

- Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
- MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.

The B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub connects up to three HDMI monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode.

The B156-003-HD-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration.

This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-HD-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Connects Up to 3 HDMI Monitors to Your Computer’s DisplayPort Output
- Ideal for digital signs in schools, churches, conference rooms, trade shows and retail settings
- Displays same image on 3 monitors simultaneously in mirror mode
- Extends desktop across 3 monitors in extended mode
- Combines 3 monitors into one large monitor in video wall mode
- Built-in 6 in. cable connects directly to DisplayPort source
- LEDs indicate when monitors are receiving a signal

Meets the Latest Performance Standards
- Supports UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 Hz
- Supports expanded resolutions in video wall mode, such as 5760 x 1080 in horizontal 1 x 3 configuration
- Supports HDCP, EDID and DDC
- Supports 48-bit Deep Color (16 bits per channel)
- Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio

Easy to Use Almost Anywhere
- Works with all operating systems
- Plug and play—no software or drivers required

TAA Compliant
Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases
SKU B156-003-HD-V2
EAN 0037332193346
Specification
Ports & interfaces
Video ports quantity3
Video port typeDisplayPort
Video out3x HDMI
Connector(s)DISPLAYPORT (MALE), (3) HDMI (FEMALE)
Cable length5.91" (0.15 m)
Features
Dolby technologiesDTS-HD, Dolby TrueHD
Colour depth48 bit
Maximum resolution3840 x 2160 pixels
Full HDYes
HD-ReadyYes
HDCPYes
Plug and PlayYes
Easy to installYes
Product colourBlack
CertificationCE, FCC, RoHS, REACH
Cable length5.91" (0.15 m)
Country of originTaiwan
Power
Input current0.5 A
Output current2 A
Output voltage5 V
AC input frequency50 - 60 Hz
AC input voltage100-240 V
Weight & dimensions
Weight3.88 oz (110 g)
Dimensions (WxDxH)4.29 x 3 x 0.945" (109 x 76.2 x 24 mm)
Package weight11.3 oz (320 g)
Package depth6.4" (162.6 mm)
Package width2.17" (55.1 mm)
Package height8.1" (205.7 mm)
Packaging data
Package weight11.3 oz (320 g)
Package depth6.4" (162.6 mm)
Package width2.17" (55.1 mm)
Package height8.1" (205.7 mm)
Packaging content
AC adapter includedYes
ManualYes
Video
Colour depth48 bit
Maximum resolution3840 x 2160 pixels
Full HDYes
HD-ReadyYes
HDCPYes
Colour
Product colourBlack
Certificates
CertificationCE, FCC, RoHS, REACH
Technical details
Dolby technologiesDTS-HD, Dolby TrueHD
Supported audio channels7.1
Package width2.17" (55.1 mm)
Package height8.1" (205.7 mm)
Video out3x HDMI
Plug and PlayYes
Easy to installYes
Logistics data
Master (outer) case width6.9" (175.3 mm)
Master (outer) case length22.5" (571.5 mm)
Master (outer) case height9" (228.6 mm)
Master (outer) case gross weight8.8 lbs (3.99 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332193343
Harmonized System (HS) code8525.50.3035
Country of originTaiwan
Manufacturer Tripp Lite
In Stock Y