Tripp Lite B127U-111-PDPD AV extender AV transmitter & receiver Gray

SKU
B127U-111-PDPD
$175.25
In stock
1-Port DisplayPort over Cat6 Extender Kit, Pigtail Transmitter/Receiver, 4K 60 Hz, HDR, 4:4:4, 230 ft. (70.1 m), TAA
DisplayPort Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127U-111-PDPD extends 4K signals from a DisplayPort source to a DisplayPort monitor up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. The one-foot pigtail design of the transmitter and receiver makes the units easy to install, especially in tight spaces.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127U-111-PDPD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Create Daisy-Chain Installations with HDMI Outputs, DisplayPort Outputs or Both
The B127U-111-PDPD is compatible with additional HDMI (B127U-110-PH) and DisplayPort (B127U-110-PD) receivers (sold separately) in a four-link daisy-chain installation. Each additional receiver adds up to 230 feet (70.1 meters) to the maximum video transmission distance and up to a total of 920 feet (280 meters) for the entire installation. Note: See the installation diagram in the owner’s manual for more information.

Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions
Say you have a brand new 4K/60 Hz HDTV in the living room, but want to also connect your Blu-ray player or media server to the older 1080p TV in the kitchen and the 4K/30 Hz monitor in your home office. The B127U-111-PDPD is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected television to display video at its maximum resolution without affecting the other outputs.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Plug-and-Play Operation for Quick Setup and Use
The included transmitter and receiver units work right out of the box with no software required. Both feature a one-foot USB-A pigtail connector as the primary power source. Plug the USB connector on the transmitter into a USB-A power adapter (such as U280-W01-QC3-1, sold separately), and plug the receiver into the display’s USB-A port. User-supplied 24 AWG Cat6 cabling connects the transmitter and receiver. Note: The transmitter and receiver can also be powered through their Micro-USB ports.

TAA-Compliant for GSA Schedule Purchases
The B127U-111-PDPD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
SKU B127U-111-PDPD
EAN 0037332281265
Specification
Features
MaterialPlastic
HDCPYes
Colour depth36 bit
Rack mountingNo
3DYes
Daisy chainYes
Maximum refresh rate60 Hz
Audio formats supportedLPCM
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Maximum transfer distance2755.9" (70 m)
Supported video modes720p, 1080p, 2160p
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
Resolution3840 x 2160 pixels
LED indicatorsYes
Cable length11.8" (0.3 m)
Product colourGray
Extended display identification data (EDID)Yes
HDCP version1.4/2.2
High Dynamic Range (HDR) supportedYes
Ports & interfaces
DisplayPorts out1
DisplayPorts in1
USB connector typeUSB Type-A
RJ-45 input ports1
RJ-45 output ports2
Connectivity technologyWired
Power
USB poweredYes
Operational conditions
Storage relative humidity (H-H)0 - 85%
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight8.82 oz (250 g)
Transmitter weight8.82 oz (250 g)
Transmitter dimensions (WxDxH)1.85 x 2.95 x 0.732" (47 x 75 x 18.6 mm)
Receiver dimensions (WxDxH)1.85 x 2.95 x 0.732" (47 x 75 x 18.6 mm)
Packaging data
Package typeBox
Package depth6.46" (164.1 mm)
Package width10.2" (260.1 mm)
Package height2.17" (55.1 mm)
Package weight19.8 oz (560 g)
Quantity per pack1 pc(s)
Packaging content
ManualYes
Technical details
Sustainability complianceYes
Compliance certificatesCE, Federal Communications Commission (FCC), REACH, RoHS, Trade Agreements Act (TAA), UKCA, WEEE
Manufacturer Tripp Lite
PDF Url https://objects.icecat.biz/objects
In Stock Y