Tripp Lite APS1250 power adapter/inverter 2500 W Black

SKU
APS1250
$650.32
In stock
PowerVerter APS Inverter/Charger with Auto-Transfer Switching
- APS1250 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger.
- Supports 120V AC output from a 120V AC line power source or 12V DC battery source.
- 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time.
- 1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode.
- Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds.
- OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage).
- 3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging.
- Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank.
- Two built-in NEMA 5-15R output receptacles pass 120V line power or inverter output through to connected equipment.
- Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals.
- Moisture-resistant construction enables vehicular or marine operation in high humidity environments.
- 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings.
- Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status.
- Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts.
- Resettable 8A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures.
- Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system.
- Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop.
- Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged.
SKU APS1250
EAN 0037332121653
Specification
Features
Input voltage12 V
Output power2500 W
Output voltage120 V
Country of originChina
Product colourBlack
Power
Input voltage12 V
Output power2500 W
Output voltage120 V
Design
Product colourBlack
Weight & dimensions
Weight23.1 lbs (10.5 kg)
Width8.75" (222.2 mm)
Depth9" (228.6 mm)
Height7" (177.8 mm)
Packaging data
Package width10.6" (269.2 mm)
Package depth10.2" (259.1 mm)
Package height12.6" (320 mm)
Package weight24.3 lbs (11 kg)
Logistics data
Products per master (outer) case1 pc(s)
Master (outer) case width10.6" (269.2 mm)
Master (outer) case gross weight24.3 lbs (11 kg)
Master (outer) case length10.2" (259.1 mm)
Master (outer) case height12.6" (320 mm)
Harmonized System (HS) code8504.40.9570
Other features
Dimensions (WxDxH)8.75 x 9 x 7" (222.3 x 228.6 x 177.8 mm)
Country of originChina
Manufacturer Tripp Lite
In Stock Y