StarTech.com SDOCK2U33RE media duplicator HDD/SSD duplicator 1 copies Black

SKU
SDOCK2U33RE
$81.31
In stock
StarTech.com Standalone Hard Drive Duplicator, External Dual Bay USB 3.0 (5 Gbps) / eSATA to 2.5/3.5" SATA III HDD/SSD Cloner/Copier, Hard Disk Docking Station, Cloning/Recovery (SDOCK2U33RE)
Hard Drive Cloner | 2.5"/3.5" HDD/SSD | USB 3.2 Gen 1 (5 Gbps) / eSATA | SATA

The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port.

Versatile Features

The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information -- ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB.

Fast Performance

With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0). See our UASP testing results below for further details.

Hassle-free Operation

With push button operation and plug-and play installation, the duplicator dock has been specially designed for hassle-free operation. The SDOCK2U33RE lets you quickly dock your hard drives or start duplicating hard drives with the push of a button. Plus, the built-in LED progress bar saves you time by letting you easily monitor the entire duplication process, so you'll know exactly when it's time to start your next operation.

For added compatibility with different drive types in duplication and docking applications, the SDOCK2U33RE supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to ensure compatibility with this drive duplicator:

2.5/3.5in IDE drives - SAT2IDEADP

mSATA drives - SAT2MSAT25

M.2 (NGFF) drives - SAT32M225

SDOCK2U33RE is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

The StarTech.com Advantage
SKU SDOCK2U33RE
EAN 0065030855884
Specification
Technical details
Product typeHDD/SSD duplicator
ChipsetJMicron - JMS562
LED indicatorsYes
USB connector typeUSB Type-B
Maximum supported storage capacity8 TB
Package width7.48" (190 mm)
Package length4.65" (11.8 cm)
Package height8.39" (213 mm)
Number of simultaneous copies1 copies
InterfaceUSB 3.2 Gen 1 (3.1 Gen 1)/eSATA
Duplicator operating modesCopy
Transfer rate6000 MB/s
Transfer rate22 GB/min
Product colourBlack
Master (outer) case width8.23" (209 mm)
Master (outer) case length24.3" (617 mm)
Master (outer) case height18.2" (463 mm)
Products per master (outer) case10 pc(s)
Compliance certificatesRoHS
Features
Product typeHDD/SSD duplicator
ChipsetJMicron - JMS562
LED indicatorsYes
USB connector typeUSB Type-B
Maximum supported storage capacity8 TB
Number of simultaneous copies1 copies
InterfaceUSB 3.2 Gen 1 (3.1 Gen 1)/eSATA
Duplicator operating modesCopy
Transfer rate6000 MB/s
Transfer rate22 GB/min
Product colourBlack
CertificationCE, FCC
Compliance certificatesRoHS
Hard drive
Supported HDD sizes2.5,3.5"
Supported HDD interfacesSerial ATA, Serial ATA II, Serial ATA III
System requirements
Windows operating systems supportedYes
Mac operating systems supportedYes
Linux operating systems supportedYes
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 x64
Power
Output voltage12 V
Output current3 A
Input current1.3 A
AC input voltage100 - 240 V
Included power plug typesANZ, EU, NA, UK
Weight & dimensions
Weight18.6 oz (528 g)
Dimensions (WxDxH)5.2 x 5.79 x 2.76" (132 x 147 x 70 mm)
Packaging data
Package width7.48" (190 mm)
Package length4.65" (11.8 cm)
Package height8.39" (213 mm)
Package weight2.2 lbs (1 kg)
ManualYes
Cables includedUSB, eSATA
Packaging content
ManualYes
Cables includedUSB, eSATA
Operational conditions
Storage temperature (T-T)-20 - 50 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80%
Colour
Product colourBlack
Certificates
CertificationCE, FCC
Other features
Output voltage12 V
Logistics data
Master (outer) case width8.23" (209 mm)
Master (outer) case length24.3" (617 mm)
Master (outer) case height18.2" (463 mm)
Products per master (outer) case10 pc(s)
Manufacturer StarTech.com
PDF Url https://objects.icecat.biz/objects/
In Stock Y