AddOn Networks ST - LC, 10m InfiniBand/fibre optic cable 393.7" (10 m) Orange

SKU
ADD-MODE-STLC6-10
$56.59
In stock
10m 62.5 micron Fiber Optic Mode Conditioning Patch Cable
AddOn Network Upgrades ADD-MODE-STLC6-1 is a 1m 62.5 micron Fiber Optic Mode Conditioning Patch Cable. This cable is a duplex multimode cable with a short segment of single mode fiber at the transmitting end. Specifically, it includes a 2 x ST 62.5/125 micron to 1 x LC 62.5/125 & 1 x LC 9/125 micron cable. The Mode Conditioning Patch Cable uses an offset splicing coupler, coupling the single mode fiber to the multimode section of the cable. The offset occurs from the center of the multimode fiber.

Addon's Fiber Mode Patch Cables are to be used with LX, or longwave Gigabit Ethernet transceivers that use both SM and MM fibers. With normal MM patch cables, the transceivers can generate multiple signals causing Differential Mode Delay (DMD), severely limiting transimission distances. Addon's Fiber Mode Conditioning Cables remove these multiple signals, eliminating problems at the receiver end. These cables are recommended for multimode cable runs greater than 50 feet .

AddOn Network Upgrades FIber Mode Conditioning Patch Cables are 100% compliant for all of our networking needs. They are compliant with IEEE 802.3z and provide low insertion loss. Now you have a cost effective solution to your network upgrade needs.
SKU ADD-MODE-STLC6-10
EAN 0821455053133
Specification
Technical details
Fiber mode structureMulti-mode, Single-mode
Connector 1ST
Connector 2LC
Cable length393.7" (10 m)
Full duplexYes
Core diameter62.5 µm
Cladding diameter125 µm
Features
Fiber mode structureMulti-mode, Single-mode
Connector 1ST
Connector 2LC
Cable length393.7" (10 m)
Full duplexYes
Core diameter62.5 µm
Cladding diameter125 µm
Product colourOrange
Connector 2 genderMale
Connector 1 genderMale
Weight & dimensions
Cable length393.7" (10 m)
Manufacturer AddOn Networks
In Stock Y