D-Link DGS-1210-10/ME network switch L2 Gigabit Ethernet (10/100/1000) 1U Black, Gray

SKU
DGS-1210-10/ME
$158.73
In stock
8x 10/100/1000BASE-T RJ-45, 2x SFP, 1U, 20 Gbps, 14.88 Mbps, VLAN, QoS, 280 x 126 x 44 mm
The DGS-1210/ME Series Metro Ethernet Switches are a range of switches ideally suited for Metro Ethernet applications. They feature 10/100/1000BASE-T RJ-45 ports and SFP ports for increased network bandwidth. Surge protection, advanced Layer 2 functions, extensive suite of security and management tools make the DGS-1210/ME Series Metro Ethernet Switches suited for Metro Ethernet applications.

Efficient and Resilient

For mission critical environments, the DGS-1210/ME Series Metro Ethernet Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). Spanning Tree allows the switch to be configured with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in failover situations. The switches also support 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability. These models feature 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Packet classification is based on ToS, DSCP, MAC, IPv4, VLAN ID, TCP/UDP port number, protocol type, or user-defined packet content for flexible configuration for specific multimedia applications such as VoIP or IPTV.

Security & Authentication

DGS-1210/ME Series Metro Ethernet Switches support 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control over the network. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC and also to define the port number to enhance user access control. The built-in D-Link Safeguard Engine™ protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.

Management Capabilities

A user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the device’s capabilities and identity to the local network, allowing administrators to better manage their network topology. Each port also supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads.

Traffic & Bandwidth Control

Integrated bandwidth control allows network administrators to define the throughput levels for each port to manage bandwidth. It provides a minimum granularity of 64 Kbps ingress control for port and flow-based bandwidth control. The DGS-1210/ME Series also supports traffic control, which optimises performance by dropping packets beyond the threshold, and port mirroring helps administrators facilitate traffic diagnostics and track switch performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimise available bandwidth.

Multicast Applications

The DGS-1210/ME Series Metro Ethernet Switches feature a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone network. ISM VLAN profiles allow users to bind/replace the predefined multicast registration information to subscriber ports quickly and easily.
SKU DGS-1210-10/ME
EAN 0790069427459
Specification
Management features
Multicast supportYes
Traffic classificationYes
Web-based managementYes
System event logYes
Quality of Service (QoS) supportYes
MIB supportRFC 1213, RFC 1493, RFC 1907, RFC 1757, RFC 2819, RFC 2021, RFC1398, 1643, 1650, 2358, 2665, RFC2674,4363, RFC 2233, 2863, RFC 2618, RFC 2620, RFC 2925
Switch layerL2
Ports & interfaces
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
SFP module slots quantity2
Basic switching RJ-45 Ethernet ports quantity8
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Fiber optic connectorSFP
Console portRJ-45
Network
IGMP snoopingYes
Cable types supportedCat5, Cat5e
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplexYes
VLAN supportYes
Spanning tree protocolYes
Port mirroringYes
Number of VLANs4094
Link aggregationYes
Flow control supportYes
Auto MDI/MDI-XYes
10G supportNo
Auto-negotiationYes
Virtual LAN featuresTagged VLAN, Port-based VLAN
Virtual LAN features
VLAN supportYes
Number of VLANs4094
Virtual LAN featuresTagged VLAN, Port-based VLAN
Data transmission
Number of multicast groups filtered256
Number of VLANs4094
Throughput14.88 Mpps
Packet buffer memory1.5 MB
MAC address table16000 entries
Switching capacity20 Gbit/s
Number of queues8
Optical fiber
Fiber optic connectorSFP
Fiber ethernet cabling technology1000BASE-X
Performance
Packet buffer memory1.5 MB
Auto-negotiationYes
Memory typeDDR3-SDRAM
Mean time between failures (MTBF)309072 h
Internal memory128 MB
Flash memory32 MB
Technical details
Form factor1U
Product colourBlack, Gray
Mean time between failures (MTBF)309072 h
Rack mountingYes
Power over Ethernet (PoE)
Power protection featuresOver voltage
Power over Ethernet (PoE)No
Security
IP-MAC-Port bindingYes
BPDU filtering/protectionYes
AuthenticationGuest VLAN, MAC-based authentication, Port-based authentication
SSH/SSL supportYes
Security algorithms802.1x RADIUS, SSH
IGMP snoopingYes
Access Control List (ACL)Yes
DHCP featuresDHCP server, DHCP client
Multicast features
Number of multicast groups filtered256
Multicast supportYes
Certificates
SafetyCE LVD, UL, CB
Electromagnetic compatibilityFCC A, CE A, VCCI
Memory
Packet buffer memory1.5 MB
Memory typeDDR3-SDRAM
Internal memory128 MB
Flash memory32 MB
Design
SafetyCE LVD, UL, CB
Form factor1U
Product colourBlack, Gray
LED indicatorsActivity, Link, Power, Speed
Electromagnetic compatibilityFCC A, CE A, VCCI
Rack mountingYes
Indication
LED indicatorsActivity, Link, Power, Speed
Power
Power consumption (max)13.59 W
Power protection featuresOver voltage
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Operational conditions
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 90%
Operating temperature (T-T)-5 - 50 °C
Operating relative humidity (H-H)10 - 90%
Heat dissipation46.35 BTU/h
Weight & dimensions
Width11" (280 mm)
Depth4.96" (126 mm)
Height1.73" (44 mm)
Manufacturer D-Link
In Stock Y