Axiom C550n 500 GB 2.5" Serial ATA III 3D TLC NAND

SKU
AXG99254
$49.50
In stock
500GB, Sata 3.0, 2-500Hz, 3.1G, 5-95% relative, +5VDC power supply
AXG99254Category: C550n Series Mobile SSD
Description: 500GB C550n Series Mobile SSD 6Gb/s SATA-III - TAA Compliant
Capacity: 500GB
Features

The Axiom C550n is a high-performance SATA 6Gb/s SSD ideally suited for cost-effective, small form factor and low power client and industrial storage solutions for PCs, Ultrabooks, Tablet PCs, and other embedded applications. Featuring the Silicon Motion SM2258 controller and quality 3D TLC NAND, these SSDs are loaded with enhancements to promote a high performing and reliable computing environment. TRIM, Wear Leveling, StaticDataRefresh, and LDPC ECC functions optimize data processing efficiency. S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health.

The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are typically realized when upgrading systems from a traditional spinning disk hard drive to a 3D TLC SSD. SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life and lower cooling costs in datacenters. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments.

Reduced Power Requirements
• No moving parts
• Super-low operating and standby power needs
• Power requirements notably reduced over a typical HD

Fast Performance
• Virtually zero spin up or seek times
• Zero rotational latency
• High sustained data transfer rate Reliable
• No volatile memory elements
• Improved resistance to shock & vibration
• Predictable and manageable failure modes reduce IT costs

Improved Operation
• Noise and vibration free
• Virtually no heat emissions
SKU AXG99254
EAN 0841280187162
Specification
Hard drive
SSD capacity500 GB
Memory type3D TLC NAND
Data transmission
Read speed500 MB/s
Write speed400 MB/s
Random write (4KB)75000 IOPS
Random read (4KB)61000 IOPS
Data transfer rate6 Gbit/s
Endurance
Mean time between failures (MTBF)1500000 h
Features
InterfaceSerial ATA III
Component forPC
TBW rating312
SSD capacity500 GB
S.M.A.R.T. supportYes
Read speed500 MB/s
Write speed400 MB/s
Memory type3D TLC NAND
Random write (4KB)75000 IOPS
Random read (4KB)61000 IOPS
Mean time between failures (MTBF)1500000 h
Data transfer rate6 Gbit/s
SSD form factor2.5"
Power
Power consumption (max)2.1 W
Operating voltage5 V
Performance
InterfaceSerial ATA III
Component forPC
TBW rating312
SSD capacity500 GB
S.M.A.R.T. supportYes
Read speed500 MB/s
Write speed400 MB/s
Memory type3D TLC NAND
Random write (4KB)75000 IOPS
Random read (4KB)61000 IOPS
Mean time between failures (MTBF)1500000 h
Data transfer rate6 Gbit/s
Design
Component forPC
SSD form factor2.5"
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Operating shock1500 G
Maximum non-operating altitude19.7" (0.5 m)
Vibration resistance3.1 G
Technical details
InterfaceSerial ATA III
S.M.A.R.T. supportYes
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Operating shock1500 G
Maximum non-operating altitude19.7" (0.5 m)
SSD form factor2.5"
Compliance certificatesRoHS
Other features
Compliance certificatesRoHS
Manufacturer Axiom
In Stock Y